Pistol grip gun with featherlight trigger for long use comes with brass fittings and parts. Trigger lock. 1/4in. female outlet and 3/8in. female inlet. Max. PSI: 3,700, GPM: 8, Female Inlet (in.): ...

The Ridgid 3,000 psi Gas Idle Down Pressure Washer features a range of professional-grade quick-connect nozzles that offer great washing versatility. Powered by a Subaru 170 cc OHC engine, this pressure washer has an idle-down function that...

Fast changeover, even in the field. Pre-plumbed and pre-tested. Fits 4-bolt engine face plates. Bolts not included; use existing bolts from old pump to install new pump. Application: Pr...

REPLACEMENT HORIZONTAL PRESSURE WASHER PUMP WORKS WITH ALL BRANDS OF PRESSURE WASHERS AND ENGINES AS LONG AS MEASUREMENTS ARE CORRECT - Max 3000psi Measurements: 3/4" shaft 1 9/16" deep Mounting holes are 2 5/8" center to center squared Will work up to 3000 PSI

This is a Briggs and Stratton assembly pump that replaces part 200303GS.

Q: Will this fit my washer? A: This pump is made to fit most pressure washers. To be sure, check these two important measurements. Take a look at your pressure washer engine and shaft, this works with Vertical 7/8" shaft engines. Next take a tape measure to the pump where the bolts go in, measure the distances from each hole to one another and if you come up with 7.750" - 6.250" - 6.500" then this will fit.

Great Replacement Pump for your pressure washer. Automatic soap injection. Adjustable pressure regulator. Repair Kits available.

Briggs & Stratton 4 Oz. Long Pressure Washer Pump Saver uses a unique ant-freeze and lubricant formula for off-season storage.

7.2 HP Required @ 3500 PSI, Diecast Aluminum Crankcase, Aluminum Connecting Rod, Forged Brass Pump Head, Oil Bath Lubrication, 4.2 HP Required @ 2000 PSI, 1.1 HP Required @ 500 PSI, 3400 RPM, Ceramic Plunger, Seal Cotton Duct, Buna N, Manifold Material Forged Brass, Gasoline Engine, Shaft Dia. 1 In., 5.2 HP Required @ 2500 PSI, 3.1 HP Required @ 1500 PSI, 6.2 HP Required @ 3000 PSI, Application High Pressure Water Applications, Including Car Wash, Pressure Wash, Sewer Jetting and Cooling Misting

Dirt Devil Pressure Washer-Pressure Flex 2000 Plus - 2000 PSI

2000XDS Made for frequent use, this tube cart pressure washer is great for every household application including general purpose cleaning of decks, patios, and driveways. It features a 35 foot power cord with ground fault interrupter, which provides a safe environment when cleaning tough dirt and grime. This pressure washer also comes with a trigger gun and a 50 foot non-marking hose, making it the complete package for all your cleaning needs. Features: -Triplex plunger pump with ceramic plungers and stainless steel valves -Adjustable pressure -35' Power cord with ground fault interrupter -Non-marking pressure hose -Trigger gun -Heavy duty wand with quick change tip pressure nozzles and soap tip -Totally enclosed fan cooled motor -Powder-coated frame with wand / hose rack -Three gallon chemical tank -10'' Pneumatic tires with tube Specifications: -Maximum PSI: 2000 PSI -Adjustable pressure: 138 PSI 2000 PSI -Engine: 5 HP -Volts: 230 volt / 26 amp -Phase: Single -Thermal relief: Mechanical -Maximum pump temperature: 180 degrees fahrenheit -Water flow: 4.0 GPM / 15.2 Ipm -Water temperature: Cold water -Chemical injection: Yes -Hose: 50 feet -Nozzle: Quick change tips in 0, 15, 25, and 40 degree pressure nozzles -Dimensions: 36 H X 23.5 W X 37 D

One time use

MANIFOLD FOR GENERAC PRESSURE WASHER WITH FAIP HORIZONTAL OR VERTICAL MOUNTED PUMPS. THIS MANIFOLD IS MANUFACTURED SO THAT ONE MANIFOLD CAN REPLACE A LOT OF DIFFERENT MANIFOLDS FOR DEVILBISS,GENERAC,BRIGGS AND STRATTON,SEARS,CRAFTSMAN,WATER CANNON,DEWALT,PORTER CABLE, BLACK AND DECKER EVERY PRESSURE WASHER WITH A VERTICAL OR HORIZONTAL PUMP MANUFACTURED BY FAIP PLEASE TAKE A GOOD LOOK AT THIS PICTURES IF YOU ARE NOT SURE PLEASE EMAIL US YOUR MODEL NUMBER OR ANY NUMBER YOU CAN FIND ON THE FRAME OR ON THE PUMP. This manifold kit fits the DeVilbiss, Ex-Cell, Water Driver, Water Cannon, Chore Master, Troy Built, Briggs and Stratton, Sears Craftsman and several other brands of pressure washers. This is the most common replacement manifold for the following models made by Proven Parts,for Ex-Cell, Sears Craftsman, Troy Build and other brands under the following model numbers: 1502CBT, 1502CVBS, 1502CVBS, 1502CVBS, 1502CVBS, 1502CVTW, 1502CWT, 1502WBT, 2020CWVB, 2020CWVB, 37801, 37801, 919-76200, EXWGV1721, WGV1721, MV3000B, MV3000B, MV3600B, MV3600B, MV4000B, MV4000B, MV5760B, WG1420, WG1522, WGV1518, WGV1518, WGV1520, WGV1520, WGV1520, WGV1521, WGV1521, WGV1521, WGV1721, WGV1721, WGV1721, WGV2020, WGV2020, WGV2020, WGV2021, WGV2021, WGV2021, WGV2424, WGV2424, WGV2424, WGVB1621, WGVB2122, WGVB2122-C, WGVH2322, WGVT1620, EXWGV1721-1, WGV1721-1