Special blend of multi-viscosity, petroleum-based hydraulic lubricant Anti-wear, non-detergent formula has rust inhibitors to maximize protection Pressure washer runs significantly ...
Hot Water Pressure Washer, Hp Rating 9.0 Hp, Operating Pressure 3000 Psi, Flow 2.8 Gpm, Pump Drive Direct, Burner Fuel Oil, Hose Dimensions 3/8 Inch X 50 Feet, Starter Type Recoil, Engine Type Honda Ohv, Gas Engine
DeWALT Pressure Washer Pump Oil is used for any brand pump that requires pump oil maintenance. By changing pump oil when specified you will increase the life of the pump and get better performance out of your pressure washer.
Whether your fuel needs include watercraft, hunting and camping, generators, backyard power equipment, or professional landscaping tools, the Duramax Flo 'n' Go fluid transfer pump and rolling gas can make refueling a snap. The Flo 'n' Go is made of a durable, high-density polyethylene material in red that safely holds gasoline, diesel, or kerosene fuels. When it comes time to refill, the pump's patented Flo 'n' Go hand pump and pump holder handle takes over, letting you transfer fluids on level surfaces with minimal priming. And thanks to the dual mechanical shutoff valves at both the tank and hose, the tank's disconnection is spill-proof, providing a safe fuel transfer for both you and the ecosystem.
The tank includes a sizable 14-gallon/53-liter capacity and a 10-foot-long fuel hose, as well as a bolt-on hanger for convenient hose storage. And users will love the sturdy 6-inch wheels, which makes it a breeze to maneuver the tank over rough terrain. Other features include an ergonomically designed, heavy-duty top handle with extra-deep base unit handholds for transport; a UL-approved mechanically vented fill cap; and recessed grooves that provide nuisance-free strapping locations for safer transport. The Flo 'n' Go fluid transfer pump meets all DOT and UN transportation requirements.
HS18000 M Features: -Reel without hose. -Ideal use is for oil. -Will increase the life of expensive chemical fluid transfer and wash down hoses. -Occupational safety will improve by eliminating the tripping hazard of unstored hose, sanitation will improve. -Ideal for food processing, pre-rinse, wash down, chemical transfer, industrial solvent handling. -Suitable for coastal, offshore and on-board ship in marine applications. -Harsh environment of salt water spray requires the use of hose reels. -Swivels include viton o-rings. -Consult manufacturer for higher temperature. -Has four 0.44' (11 mm) diameter mounting holes. Specifications: -Material: Stainless Steel and Aluminum. -Overall dimensions: 19'' H x 20'' W. -Hose dimensions: 0.5'' Dia.. -Hose length: 200'. -Hose diameter: 0.25''. -O.D.: 0.53''. -Hose length: 200'. -Pressure: 3000 psi. -Inlet (F) NPTF: 0.5''. -Maximum temperature: 210 F. Specifications
MI-T-M" PUMP OIL Pint (16 oz.) For replacing worn oil in pressure washer pumps and air compressors Specially formulated to reduce wear, contains rust and corrosion additives Non-foaming lubricant is suitable in all climates Can be used as hydraulic lubricant Multi viscosity oil should be changed every 250 hours Bottle
Sold as 5 UNITS at $5.45 per unit. (1 unit = each.) Pint (16 oz.). For replacing worn oil in pressure washer pumps and air compressors. Specially formulated to reduce wear, contains rust and corrosion additives. Non-foaming lubricant is suitable in all climates. Can be used as hydraulic lubricant. Multi viscosity oil should be changed every 250 hours. Bottle. Manufacturer number: AW-4085-0016. SKU #: 1213958. Country of origin: (TBA). Distributed by Mi-T-M Corp.
General purpose 30W pump oil is specially formulated for effective lubrication and optimum performance in most pressure washers sold by Northern Tool. Resists foaming while protecting against rust and oxidation. Formulated to provide protection during high-pressure, high-RPM operation. One-quart resealable plastic container. U.S.A. Application: Oil