Chore Master By Mi-T-M, 2400 PSI Gas Pressure Washer, 160CC Honda GCV160 OHC Vertical-Shaft Engine, 2.0 GPM, Axial Piston Pump With Thermal Relief Valve & Low Pressure Detergent Injector, Trigger Gun With Safety Lock-Off & Zero To 60 Degree Adjustable...

QPW1055 Features: Cold water pressure washer Durable steel frame Direct-drive pump Gas powered Residential-grade and portable Integrated chemical injection Made in Mexico Volume: 2.3 GPM Pressure: 2600 PSI 160cc Honda engine

Chore Master By Mi-T-M, 2400 PSI @ 2.0 GPM Gas Pressure Washer, 190CC Briggs Quantum 675 Series Vertical Shaft Engine, Axial Piston Pump With Thermal Relief Valve & Low Pressure Detergent Injector, Trigger Gun With Safety Lock Off & 0 Degrees To 60...

Mi-T-M Original Part - 3-0111 PUMP VERTICAL AXIAL HOMELITE

Mi-T-M Original Part - 3-0109 PUMP VERTICAL AXIAL PISTON

Q: Will this fit my washer? A: This pump is made to fit most pressure washers. To be sure, check these two important measurements. Take a look at your pressure washer engine and shaft, this works with Vertical 7/8" shaft engines. Next take a tape measure to the pump where the bolts go in, measure the distances from each hole to one another and if you come up with 7.750" - 6.250" - 6.500" then this will fit.

FITS ALL BRANDS - Max 2700 PSI --------------------------------- This pump works with pressure washers made by GENERAC, HONDA, BLACKMAX, TROYBILT, CRAFTSMAN, BRIGGS and STRATTON, ANNOVI REVERBERI, KARCHER and many more brands. If the measurements listed above match up this pump will will work with your washer!

MANIFOLD FOR GENERAC PRESSURE WASHER WITH FAIP HORIZONTAL OR VERTICAL MOUNTED PUMPS. THIS MANIFOLD IS MANUFACTURED SO THAT ONE MANIFOLD CAN REPLACE A LOT OF DIFFERENT MANIFOLDS FOR DEVILBISS,GENERAC,BRIGGS AND STRATTON,SEARS,CRAFTSMAN,WATER CANNON,DEWALT,PORTER CABLE, BLACK AND DECKER EVERY PRESSURE WASHER WITH A VERTICAL OR HORIZONTAL PUMP MANUFACTURED BY FAIP PLEASE TAKE A GOOD LOOK AT THIS PICTURES IF YOU ARE NOT SURE PLEASE EMAIL US YOUR MODEL NUMBER OR ANY NUMBER YOU CAN FIND ON THE FRAME OR ON THE PUMP. This manifold kit fits the DeVilbiss, Ex-Cell, Water Driver, Water Cannon, Chore Master, Troy Built, Briggs and Stratton, Sears Craftsman and several other brands of pressure washers. This is the most common replacement manifold for the following models made by Proven Parts,for Ex-Cell, Sears Craftsman, Troy Build and other brands under the following model numbers: 1502CBT, 1502CVBS, 1502CVBS, 1502CVBS, 1502CVBS, 1502CVTW, 1502CWT, 1502WBT, 2020CWVB, 2020CWVB, 37801, 37801, 919-76200, EXWGV1721, WGV1721, MV3000B, MV3000B, MV3600B, MV3600B, MV4000B, MV4000B, MV5760B, WG1420, WG1522, WGV1518, WGV1518, WGV1520, WGV1520, WGV1520, WGV1521, WGV1521, WGV1521, WGV1721, WGV1721, WGV1721, WGV2020, WGV2020, WGV2020, WGV2021, WGV2021, WGV2021, WGV2424, WGV2424, WGV2424, WGVB1621, WGVB2122, WGVB2122-C, WGVH2322, WGVT1620, EXWGV1721-1, WGV1721-1

Great Replacement Pump for your pressure washer. 4" radius from center of shaft to center of bolt hole. Picture shows 2 but price is for one.

Industrial Machinery Manuals is Proud to Offer 1 Quality Bound Copy Of A: Campbell Hausfeld PW1755, PW2200, PW1753, PW2450, PW2455, Gasoline Vertical Pressure Washer & Briggs & Stratton Quantum 120000, Owners Manual Year (2003) This Manual Covers Models: PW1755 PW1753 PWPW1755 PW1753 PW2200 PW2455 This Manuals Includes: Frequentley Asked Questions, Safety and Warning Information, Assembly and Pre-Operation, Startup, Operation, Shutdown, and Storage, Maintenance and Technical Information, Troubleshooting Chart, Service Record and Notes, Warranty, Briggs & Stratton: Quantum 120000, Operating & Maintenance Instructions, This Manuals Has 125 Printed Pages.

This is a Briggs and Stratton assembly pump that replaces part 200303GS.

Maximum Pump Speed: 3400 RPM. Forged brass head & valve covers. Stainless steel plungers. Inlet Port: 3/4(in) FGH (garden hose). Discharge Port: 22mm (Twist Connect). Built In unloader and chemical injector. Maximum horsepower required to operate at 3,000 PSI: 6.84 GHP

This plunger pump will pump upto 2.g gpm at 2500 PSI. It spins at 3400 RPM in a direct drive system coupled with a gasoline engine. The matching flange provides convenient connection to most 7/8" shaft 1.1 - 5.5 HP engines. The hollow shafted pump includes a built - in pressure control valve, and chemical injection system.

Maximum Pump Speed: 3400 RPM. Aluminum head & brass valve covers. Stainless steel plungers. Inlet Port: 3/4(in) FGH (garden hose). Discharge Port: 22mm (Twist Connect). Built In unloader and chemical injector. Maximum horsepower required to operate at 2,400 PSI: 4.4 GHP

Maximum Pump Speed: 3400 RPM. Forged brass head & valve covers. Stainless steel plungers. Inlet Port: 3/4(in) FGH (garden hose). Discharge Port: 22mm (Twist Connect). Built In unloader and chemical injector. Maximum horsepower required to operate at 2,500 PSI: 4.5 GHP