The AR North America RMW2G24 features a 7/8" hollow shaft, operates at 3400 RPM, and has a max PSI of 2400. Manifold is made from precision die cast aluminum with a special anti-corrosion finish.
Max Flow (in GPM): 2.0
Max Flow (in L/Min): 7.6
Max Pressure (in PSI): 2400
Max Bar: 166
Power EBHP: 3.2
Bore Dia: 12mm
Stroke: 8.3mm
Crankshaft ID Stamp: 5
Pump Speed (in RPM): 3400
Shaft Diameter: 7/8" hollow
Maximum Pump Speed: 3400 RPM. Aluminum head & brass valve covers. Stainless steel plungers. Inlet Port: 3/4(in) FGH (garden hose). Discharge Port: 22mm (Twist Connect). Built In unloader and chemical injector. Maximum horsepower required to operate at 2,400 PSI: 4.4 GHP
Brand New Annovi Reverberri Pressure Washer Pump
Manufacturer: Annovi Reverberri
Model: RMW2.2G24 EZ Standard Model
Max Pressure: 2400 Psi
Flow Rate: 2.2 GPM (Gallon/Minute)
Thermal/Temperature Relief Protection Included
RPM: 3400 RPM
Perfect for Vertical Engine Mount direct Couple with a gasoline engine
Connection to 7/8" Shaft
Equipped with EZ Start Feature
Thermal/Temperature Relief Protection Included
Chemical Injection Syatem Included
Build in Pressure Control Valve
******************************************************************************
Please make sure to check the HOLE in the ARM location
relative to the inlet/outlet Port.
THIS IS THE STD MODEL NOT SX MODEL
******************************************************************************
The AR North America RMW2.2G24D-EZ features a 7/8" hollow shaft, operates at 3400 RPM, and has a max PSI of 2400. This pump comes equiped with an Easy Start Valve that eases internal pump pressures that can make cold starts with gasoline engines difficult. Manifold is made from precision die cast aluminum.
Max Flow (in GPM): 2.2
Max Flow (in L/Min): 8.3
Max Pressure (in PSI): 2400
Max Bar: 166
Power EBHP: 3.6
Bore Dia: 12mm
Stroke: 8.3mm
Crankshaft ID Stamp: 5
Pump Speed (in RPM): 3400
Shaft Diameter: 7/8" hollow
Brand New Annovi Reverberi Pressure Washer Pump
Manufacturer: Annovi Reverberi
Model: RMW2.2G24 EZ Standard Model
Max Pressure: 2400 Psi
Flow Rate: 2.2 GPM (Gallon/Minute)
Thermal/Temperature Relief Protection Included
RPM: 3400 RPM
Perfect for Vertical Engine Mount direct Couple with a gasoline engine
Connection to 7/8" Shaft
Equipped with EZ Start Feature
Thermal/Temperature Relief Protection Included
Chemical Injection Syatem Included
Build in Pressure Control Valve
******************************************************************************
Please make sure to check the HOLE in the ARM location
relative to the inlet/outlet Port.
THIS IS -SX- MODEL (Inlet/Outlet is 180 degree from Std. RMW 2.2G24 EZ)
******************************************************************************
Maximum Pump Speed: 3400 RPM. Forged brass head & valve covers. Stainless steel plungers. Inlet Port: 3/4(in) FGH (garden hose). Discharge Port: 22mm (Twist Connect). Built In unloader and chemical injector. Maximum horsepower required to operate at 2,500 PSI: 4.5 GHP